Dell Inspiron 1000 Скачать руководство пользователя | Manualshive

Страница: 12 / 130

background image

2. Connect the other end of the power cable to the power distribution unit (PDU) on the rack.

Figure 4. Connecting to the PDU

After you connect the power cables, the base enclosure automatically starts up.

Discover your system

Once you have completed installing your base enclosure and optional expansion enclosures, discover your newly installed
enclosure.

Refer to

PowerStore Networking Guide for PowerStore T Models or PowerStore Networking Guide for PowerStore X Models

for details.

Upgrade PowerStore software

PowerStore systems come pre-installed with the latest version of PowerStore software that was available at the time of
shipment. After installing the PowerStore system, Dell recommends upgrading the PowerStore software to the latest available
version. Refer to the

PowerStore Software Upgrade Guide

for detailed instructions.

Install a 25-drive expansion enclosure

Take the following actions to install a 25-drive expansion enclosure into the system during the initial system installation or to
install the first expansion enclosure into a running system.

NOTE:

During the initial system installation, do not power on the system until you have finished cabling all of the 25-drive

expansion enclosures.

Summary of tasks for installing an expansion enclosure

To install an expansion enclosure, complete the tasks below in the order in which they appear. This document provides
instructions for completing each task.

1. Verify the contents of the shipping package.
2. Choose the space in the cabinet for the new expansion enclosure.
3. Remove the filler panels that cover the cabinet space for the new expansion enclosure.
4. Install the rails for the new expansion enclosure in the cabinet.
5. Install the expansion enclosure on the rails.
6. If the new expansion enclosure shipped without its drives installed, install the drives in the expansion enclosure.
7. Install the front bezel on the new expansion enclosure.
8. If you are installing the expansion enclosure during the initial system installation, attach the expansion (back-end) cables, and

then attach the power cables.

9. If you are installing the first expansion enclosure to a running system, attach the power cables, and then the attach the

expansion (back-end) cables.

12

Install a new base enclosure and optional expansion enclosure

«
...
10
11
12
13
14
...
»

Содержание Inspiron 1000



































































































































Отзывы:

Нет отзывов

Похожие инструкции для Inspiron 1000

Бренд: IBM Страницы: 170

Бренд: IBM Страницы: 257

Бренд: IBM Страницы: 63

Бренд: Tandy Страницы: 82

Бренд: Acer Страницы: 43

Бренд: Avalue Technology Страницы: 15

Бренд: PMC Страницы: 126

Бренд: Digital Equipment Страницы: 321

Бренд: ZAHNER Страницы: 24

Бренд: Zotac Страницы: 57

Бренд: Acer Страницы: 84

Бренд: Vivo Страницы: 3

BX-951-DC series

Бренд: Contec Страницы: 111

Бренд: Hitachi Страницы: 123

Бренд: Hitachi Страницы: 194

Бренд: Hitachi Страницы: 197

Бренд: Hitachi Страницы: 227

Бренд: Hitachi Страницы: 1153

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды