support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow
the safety instructions that came with the product.
1. Follow the safety guidelines listed in safety instructions section.
2. Keep the Phillips #2 screwdriver ready.
3. Follow the procedure listed in the Before working inside your system section.
4. Remove the PCIe mezzanine card.
Steps
1. Remove the two screws that secure the Network Daughter Card (NDC) to the system board.
CAUTION:
To prevent damage to the NDC, you must hold the card only by its edges.
2. Lift the card from the system board.
Figure 33. Removing the NDC
1. slot on the NDC
2. screw (2)
3. NDC
4. standoff (2)
5. connector
6. tab projections
Next steps
1. Install the NDC.
2. Install the PCIe mezzanine card.
3. Follow the procedure listed in the After working inside your system section.
Related References
Related tasks
Before working inside your system
on page 51
Removing the PCIe mezzanine card
on page 71
Installing the Network Daughter Card
on page 85
84
Installing and removing server module components
