support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow
the safety instructions that came with the product.
1. Follow the safety guidelines listed in the Safety instructions section.
2. Follow the procedure listed in the Before working inside your system section.
3. Keep the Phillips #1 screwdriver ready.
Steps
1. Remove the four screws from the slide rails on the hard drive or SSD carrier.
2. Slide the hard drive or SSD out of the hard drive or SSD carrier.
Figure 50. Removing a 2.5-inch hard drive or SSD in a 2.5-inch hard-drive or SSD carrier
1. screw (4)
2. hard drive or SSD
3. hard-drive or SSD carrier
4. screw hole (4)
Next steps
•
Install a new 2.5-inch hard drive or SSD in a 2.5-inch hard-drive or SSD carrier.
•
Follow the procedure listed in the After working inside your system section.
Related References
Related tasks
Installing a 2.5-inch hard drive or SSD in a 2.5-inch hard-drive or SSD carrier
100
Installing and removing server module components
