Dell HHB Скачать руководство пользователя страница 53

Страница: 53 / 134

2. If installed, remove the front bezel from the PowerEdge VRTX enclosure.
3. Turn off the server module using the operating system commands or the CMC, and ensure that the server module is powered off.

When a server module is powered off, its front panel power indicator is off.

Steps

1. Press the release button on the server module handle.

CAUTION:

If you are permanently removing the server module, install a server module blank(s). Operating the

system for extended periods of time without a server module blank installed can cause the enclosure to overheat.

2. Pull the server module handle to unlock the server module from the enclosure.

CAUTION:

To prevent damage to the I/O connectors, do not touch connectors or the connector pins.

CAUTION:

To protect the I/O connector pins, install the I/O connector covers every time a server module is removed

from the enclosure.

3. Slide the server module out of the enclosure.
4. Install the I/O connector cover over the I/O connector.

Figure 7. Removing the I/O connector cover

a. server module cover
b. I/O connector cover

Installing and removing server module components

Содержание HHB







































































































































Результаты поиска

Содержание HHB

Отзывы:

Похожие инструкции для HHB

Бренды по названию

Популярные бренды

Dell HHB, Руководство пользователя

Результаты поиска

Содержание HHB

Отзывы:

Похожие инструкции для HHB

Бренды по названию

Популярные бренды