NOTE:
Install the server module partitions to install half-height server module(s). For more information, see the
Dell
PowerEdge VRTX Enclosure Owner’s Manual
at Dell.com/poweredgemanuals.
Steps
1. If you are installing a new server module, remove the plastic cover from the I/O connector(s) and save for future use.
2. Orient the server module so that the module handle is on the left side of the server module.
CAUTION:
While installing the server modules, ensure that they are properly aligned with the slots, to prevent
damage to the server module connectors.
3. Align the server module with the server module slot and guide rails on the enclosure.
4. Slide the server module into the enclosure until the module release handle engages and the server module is locked in place.
Figure 9. Installing the I/O connector cover
a. server module cover
b. I/O connector cover
Installing and removing server module components
55
