Removing a 1.8-inch SSD from a 1.8-inch SSD carrier
Prerequisites
CAUTION:
Many repairs may only be done by a certified service technician. You should only perform troubleshooting and
simple repairs as authorized in your product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow
the safety instructions that came with the product.
1. Follow the safety guidelines listed in the Safety instructions section.
2. Follow the procedure listed in the Before working inside your system section.
Steps
Pull the rails on the side of the carrier and lift the SSD out of the carrier.
Results
Figure 52. Removing a 1.8-inch SSD in a 1.8-inch SSD carrier
1. SSD carrier
2. SSD
Next steps
1. Install a 1.8-inch SSD in a 1.8-inch SSD carrier.
2. Follow the procedure listed in the After working inside your system section.
Related References
Related tasks
Installing a 1.8-inch SSD in a 1.8-inch SSD carrier
Installing a 1.8-inch SSD in a 1.8-inch SSD carrier
Prerequisites
CAUTION:
Many repairs may only be done by a certified service technician. You should only perform troubleshooting and
simple repairs as authorized in your product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow
the safety instructions that came with the product.
NOTE:
You must remove the SSD from a SSD carrier to replace a faulty SSD from a SSD carrier.
102
Installing and removing server module components
