manualshive.com logo in svg

Dell EMC PowerEdge VRTX, Руководство пользователя

Поделиться
Скачать
Dell EMC PowerEdge VRTX Скачать руководство пользователя страница 19

Item Indicator, Button, or Connector

Description

11

Server modules

Up to four PowerEdge M520, M620, M630, or M640 server modules or 2 M820 
server modules configured for the enclosure.

Minimum CMC Version

The following table lists the minimum CMC version required to enable the listed server modules.

Table 4. Minimum CMC Version for server modules

Servers

Minimum version of CMC

PowerEdge M520

CMC 1.36

PowerEdge M620

CMC 1.36

PowerEdge M820

CMC 1.36

PowerEdge M630

CMC 2.00

PowerEdge M830

CMC 2.00

PowerEdge M640

CMC 3.00

The following table lists the minimum CMC version required to enable the listed I/O moduless.

Table 5. Minimum CMC Version for I/O modules

IOM Switches

Minimum version of CMC

R1 VRTX 1Gb Pass-through

CMC 1.20

R1-2401 VRTX 1GbE Switch

CMC 1.20

R1-2210 VRTX 10Gb Switch

CMC 2.00

Supported Remote Access Connections

The following table lists the supported Remote Access Controllers.

Table 6. Supported Remote Access Connections

Connection

Features

CMC Network Interface ports

•

GB port: Dedicated network interface for the CMC web interface.

•

DHCP support.

•

SNMP traps and e-mail event notification.

•

Network interface for the iDRAC and I/O Modules (IOMs).

•

Support for Telnet/SSH command console and RACADM CLI commands including 

system boot, reset, power-on, and shutdown commands.

Serial port

•

Support for serial console and RACADM CLI commands including system boot, reset, 

power-on, and shutdown commands.

•

Support for binary interchange for applications designed to communicate with a binary 

protocol to a particular type of I/O Module.

•

Serial port can be connected internally to the serial console of a server, or I/O module, 

using the connect (or racadm connect) command.

•

Provides access only to the active CMC.

Supported Platforms

CMC supports modular servers designed for the PowerEdge VRTX platform. For information about compatibility with CMC, see the 
documentation for your device.

19

Содержание EMC PowerEdge VRTX

















































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды