manualshive.com logo in svg

Dell EMC PowerEdge VRTX, Руководство пользователя

Поделиться
Скачать
Dell EMC PowerEdge VRTX Скачать руководство пользователя страница 174

NOTE: 

– For a disabled PERC, none of the other options Reset Configuration, Export TTY Log, Discard Pinned Cache, and 

Disable RAID Controller are available in the drop-down menu.

– By default the two integrated shared storage adapters are detected with high availability mode.
– You must enable 

Fault Tolerance mode

 on the external shared controller after it is cabled.

–

Enable Fault Tolerance

 and 

Disable Fault Tolerance

 are displayed only for the External Shared PERC 8 cards. The 

default mode of the External Shared PERC 8 cards is the non-fault-tolerant mode.

NOTE: Enabling or disabling a peer controller initiates a chassis power cycle. The changes are reflected only after the 
power cycle is complete.

Enabling or Disabling RAID Controller Using RACADM

To enable a peer controller using RACADM, open a serial/Telnet/SSH text console to CMC, log in, and enter:

racadm raid enableperc:<AdapterFQDD>

To disable a peer controller, enter:

racadm raid disableperc:<AdapterFQDD>

NOTE: For more information on this feature using the RACADM interface see the 

RACADM Command Line Reference 

Guide for iDRAC and CMC

.

Enabling or disabling fault tolerance of external RAID controller using 

RACADM

To enable the fault tolerance:

racadm raid controllers: <FQDD of External Shared PERC8> -p HighAvailabilityMode ha

To disable the fault tolerance:

racadm raid set controllers: <FQDD of External Shared PERC8> -p HighAvailabilityMode None

Viewing Physical Disk Properties Using the CMC Web Interface

Make sure that physical disks are installed on the chassis.
To view the properties of physical disk drives:

1.

In the left pane, go to 

Chassis Overview 

→ 

Storage 

→ 

Physical Disks

.

The 

Properties

 page is displayed.

2.

To view properties of all the physical disk drives, under the 

Physical Disks

 section, click the 

.

NOTE: The following attributes are displayed for fault-tolerant mode of integrated shared adapters:

•

Active controller — Shared PERC8 (Integrated 1)

•

Redundant/Failover controller — Shared PERC8 (Integrated 2)

The following attributes are displayed for fault-tolerant mode of external shared adapters:

•

Active controller — Shared PERC8 (SPERC Slot 5)

•

Redundant/Failover controller — Shared PERC8 (SPERC Slot 6)

You can also use the following filters to view specific physical disk drive's properties:

•

Under the 

Basic Physical Disks Filter

 option , from the 

Group By

 drop-down menu, select 

Virtual Disk

, 

Controller

, or 

Enclosure

, and then click 

Apply

.

•

Click 

Advanced Filter

, select the values for various attributes, and then click 

Apply

.

174

Содержание EMC PowerEdge VRTX

















































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды