Dell E36S Series, Руководство пользователя

Страница: 65 / 120

Figure 28. Removing the optical drive filler
1. optical drive bay 2. tabs (4)
3. optical drive filler 4. hard drive cage
Next steps
1. Install the hard drive cage.
2. Reconnect the disconnected data and power cables to the hard drives and optical drive.
3. Install the bezel.
4. Reconnect all peripherals disconnected from the control panel assembly.
5. Follow the procedure listed in
After working inside your system on page 43.
Related tasks
Removing the bezel on page 45
Removing the hard drive cage on page 53
Installing the hard drive cage on page 54
Installing the bezel on page 46
Installing the optical drive blank and filler
The optical drive blank is on the bezel and the optical drive filler is located in the optical drive slot on the hard drive cage.
Prerequisites
1. Ensure that you follow the Safety instructions on page 42.
2. Follow the procedure listed in Before working inside your system on page 43.
3. Disconnect all peripherals connected to the control panel assembly.
4. Remove the bezel.
5. If connected, disconnect the power and data cable from the optical drive and hard drives.
6. Remove the hard drive cage.
7. Remove the optical drive.
Steps
1. On the bezel, insert the tabs on optical drive blank into the slots on the bezel and push the blank until it locks into place.
Installing and removing system components 65