Dell E36S Series, Руководство пользователя

Страница: 80 / 120

NOTE: Keep the expansion card blank for future use. Expansion card blank must be installed into empty expansion
card slots to maintain FCC certification of the system. The blanks also keep dust and dirt out of the system and aid
in proper cooling and airflow inside the system.
4. Holding the expansion card by its edges, position the card so that the card-edge connector aligns with the expansion card connector.
5. Push the expansion card into the expansion card slot until the expansion card is fully seated.
6. Press the expansion card latch down toward the system until it clicks into place.
Figure 41. Installing an expansion card
a. expansion card
b. expansion card latch
c. expansion card blank
Next steps
Follow the procedure listed in After working inside your system .
SD vFlash card (optional)
An SD vFlash card is a Secure Digital (SD) card that plugs into the SD vFlash card slot in the iDRAC port card. It provides persistent on-
demand local storage and a custom deployment environment that enables automation of server configuration, scripts, and imaging. It
emulates USB device(s). For more information, see the Integrated Dell Remote Access Controller User's Guide at
Dell.com/
idracmanuals .
Removing the optional SD vFlash card
Prerequisites
1. Follow the safety guidelines listed in the Safety instructions section.
2. Locate the SD vFlash card slot at the back of the chassis.
Steps
To remove the SD vFlash card, push the SD vFlash card inward to release it, and pull the SD vFlash card from the SD vFlash card slot.
80 Installing and removing system components