Dell E36S Series, Руководство пользователя

Страница: 98 / 120

CAUTION: Do not lift the system board by holding a memory module, processor, or other components.
CAUTION: Take care not to damage the system identification button while placing the system board into the chassis.
1. Follow the safety guidelines listed in Safety instructions section.
2. Follow the procedure listed in the Before working inside your system section.
3. Keep the Phillips #2 screwdriver ready.
Steps
1. Hold the system board by its edges, and orient it toward the back of the chassis.
2. Lower the system board into the chassis until the connectors at the back of the system board align with the slots on the back of the
chassis.
3. Tighten the screws that secure the system board to the chassis.
Figure 58. Install the system board
a. touch point (2)
b. system board
c. system board t-handle post
Next steps
1. If required, install the Trusted Platform Module (TPM). See, the Installing the Trusted Platform Module section.
2. Reinstall the following components:
a. memory modules
b. heat sink and processor
c. iDRAC port card, if removed
98 Installing and removing system components