Dell E36S Series, Руководство пользователя

Страница: 49 / 120

Steps
1. Disconnect the intrusion switch cable from the system board.
2. Slide the intrusion switch and push it out of the slot on the chassis.
Figure 13. Removing the intrusion switch
a. intrusion switch slot
b. intrusion switch
c. intrusion switch cable
Next steps
1. Install the intrusion switch.
2. Follow the procedure listed in
After working inside your system on page 43.
Related tasks
Installing the intrusion switch on page 49
Installing the intrusion switch
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and
simple repairs as authorized in your product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow
the safety instructions that are shipped with your product.
1. Ensure that you follow the Safety instructions on page 42.
2. Follow the procedure listed in Before working inside your system on page 43.
Installing and removing system components 49