Dell E36S Series, Руководство пользователя

Страница: 45 / 120

Figure 9. Installing the system cover
1. slots 2. tabs
3. cover release latch 4. system cover
Next steps
1. Place the system upright on its feet on a flat and stable surface.
2. Reconnect the peripherals and connect the system to the electrical outlet
3. Turn the system on, including any attached peripherals.
Bezel
The bezel is attached to the front side of the server and prevents accidents while removing the hard drive or when pressing the reset or
power button. The front bezel can also be locked for additional security.
Removing the bezel
Prerequisites
1. Ensure that you follow the Safety instructions on page 42.
2. Follow the procedure listed in Before working inside your system on page 43.
Steps
1. Lift the retention clips at the edge of the bezel.
2. Lift the bezel and pull it away from the system.
Installing and removing system components 45