Dell C5765DN страница 514 Скачать руководство пользователя

Страница: 514 / 673

22 Problem Solving

514

Paper is often

jammed or

wrinkled.

Is the paper loaded correctly

in the tray?

Load the paper correctly.
Refer to "Loading Paper" (P.207).

Is the paper tray inserted

correctly?

Firmly push in the paper tray until it stops to

insert it correctly.
Refer to "Loading Paper" (P.207).

Is the paper damp?

Replace the paper with new one.
Refer to "Loading Paper" (P.207).

Is the paper curled?

Turn over the paper in the tray, or replace the

paper with new one.
Refer to "Loading Paper" (P.207).

Are the paper and paper tray

settings correct?

Correctly set the paper and paper trays to

correspond to the paper.
Refer to "Changing the Paper Settings"

(P.214).

Are any torn pieces of paper

remaining or is there a foreign

object in the machine?

Open the cover of the machine or slide out

the paper tray to remove the torn pieces or

the foreign object.
Refer to "Paper Jams" (P.617) or "Loading

Paper" (P.207).

Is non-standard paper loaded

in the tray?

Replace with paper that meets machine

specifications.
Refer to "Print Media Guidelines" (P.200) or

"Loading Paper" (P.207).

Is paper exceeding the

maximum fill line in the tray?

Load paper in the paper tray so that it does

not exceed the maximum fill line.
Refer to "Loading Paper" (P.207).

Are the paper guides set

correctly?

Load the paper correctly, and align the paper

guides to the paper.
Refer to "Loading Paper" (P.207).

Is the image nearly the same

size as the paper?

Increase the edge erase widths.
For more information, refer to "Copy" (P.49)

when you copying, or to the help of the print

driver when printing.

Is the paper finely cut out?

Some types of paper may not be cut out

finely. Load the paper after fanning it well.

A document is not

fed into the

document feeder.

Is the document small?

The minimum size of the document that can

be loaded on the document feeder is 125 x 85

mm (Standard size: A5).
Refer to "Copying Procedure" (P.50).

An error message

appears after

paper is loaded in

Tray 5 and the

<Start> button is

pressed.

Check the positions of the

paper guides of Tray 5.

Adjust the paper guides to the correct

positions.
Refer to "Loading Paper in Tray 5 (Bypass

Tray)" (P.211).

Symptom

Cause

Remedy

Содержание C5765DN


































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание C5765DN

Отзывы:

Похожие инструкции для C5765DN

Бренды по названию

Популярные бренды

Dell C5765DN, Руководство пользователя

Результаты поиска

Содержание C5765DN

Отзывы:

Похожие инструкции для C5765DN

Бренды по названию

Популярные бренды