Dell C5765DN Скачать руководство пользователя страница 111

Страница: 111 / 673

Output Format

111

Paper Size and Stapling Position

• Finisher-AB1

Note

•

The staple orientation displayed on the touch screen differs from the actual staple orientation. Outputs

are stapled in the orientation shown in the above table.

•

When different sized documents are loaded in the document feeder, outputs are stapled only when all

the documents match the document guides. For information on how to copy different sized documents

simultaneously, refer to "Mixed Size Originals (Scanning Different Size Documents Simultaneously)"

(P.89).

ID Card Copy (Copying Both Sides of an ID Card)

This feature allows you to copy both sides of a small undetectable original, such as an ID

card, onto one side of paper.

Specify the orientation of the document in
[Original Orientation] on the [Layout

Adjustment] screen.

Place the document slightly away from the top left corner of the document glass, and close
the document glass.

Note

•

Always use the document glass when copying. You cannot use the document feeder with this feature.

•

Specify the orientation of the original document correctly.

•

If the edges of the image are missing, slightly move the card inward on the document glass so that the

whole image can be scanned.

1 Staple

(Left)

1 Staple

(Right)

A4, B5,

7.25 x 10.5",

8.5 x 10",

8.5 x 11",

8.5 x 13",

8.5 x 14",
16K

Original document

Original orientation

Copied output

Front side

Back side

Front side

Back side

Содержание C5765DN


































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание C5765DN

Отзывы:

Dell C5765DN, Руководство пользователя, Страница: 111 / 673

Результаты поиска

Содержание C5765DN

Отзывы: