Dell C2660dn Скачать руководство пользователя страница 64

Страница: 64 / 361

Before loading the print media, flex the sheets and fan them. Straighten the edges of the stack on a level surface.

Load the print media into the tray with the recommended print side facing up.

NOTE:

Do not exceed the maximum fill line in the tray. Overfilling the tray may cause paper jams.

Align the width guides against the edges of the paper.

NOTE:

When loading user-specified print media, adjust the width guides and slide the extendable part of the tray by

pinching the length guide and sliding it until it rests lightly against the edge of the paper.

After confirming that the guides are securely adjusted, insert the tray into the printer.

NOTE:

If the front side of the tray is extended, the tray protrudes when it is inserted into the printer.

Loading Paper

Содержание C2660dn










































































































































































































































































































































































Результаты поиска

Содержание C2660dn

Отзывы:

Бренды по названию

Популярные бренды

Dell C2660dn, Руководство пользователя

Результаты поиска

Содержание C2660dn

Отзывы:

Бренды по названию

Популярные бренды