Dell C2660dn Скачать руководство пользователя страница 48

Страница: 48 / 361

Configuring the Wireless Adapter Without Using Dell Printer Setup

WPS-PIN

The PIN code of WPS-PIN can only be configured from the operator panel.

NOTE:

WPS-PIN (Wi-Fi Protected Setup-Personal Identification Number) is a method to authenticate and register devices

required for wireless configuration by entering PIN assignments to a printer and computer. This setting, performed through an

access point, is available only when the access points of your wireless router support WPS.

Press the

(Menu)

button.

Press the

button until

Admin Settings

is highlighted, and then press the

(Set)

button.

Press the

button until

Network

is highlighted, and then press the

(Set)

button.

Press the

button until

Wireless

is highlighted, and then press the

(

Set

) button.

Press the

button until

WPS Setup

is highlighted, and then press the

(Set)

button.

Ensure that

PIN Code

is highlighted, and then press the

(Set)

button.

Write down the displayed 8-digit PIN code or select

Print PIN Code

. The PIN code is printed.

Ensure that

Start Configuration

is highlighted, and then press the

(Set)

button.

Ensure that the message

Please wait WPS Setting

is displayed, and enter the PIN code displayed on step

7 into the wireless LAN access point (Registrar).

NOTE:

For WPS operation on the wireless LAN access point, refer to the manual supplied with the wireless LAN access

point.

When the WPS operation is successful and the printer is rebooted, wireless LAN connection setting is completed.

WPS-PBC

You can start Push Button Control only from the operator panel.

NOTE:

WPS-PBC (Wi-Fi Protected Setup-Push Button Configuration) is a method to authenticate and register devices required

for wireless configuration by pressing the button provided on the access point via wireless routers, and then performing WPS

PBC setting on the operator panel. This setting is available only when the access point supports WPS.

NOTE:

Before starting WPS-PBC, confirm the position of the WPS button (button name may vary) on the wireless LAN access

point. For information about WPS operation on the wireless LAN access point, refer to the manual supplied with the wireless

LAN access point.

Press the

(Menu)

button.

Press the

button until

Admin Settings

is highlighted, and then press the

(Set)

button.

Press the

button until

Network

is highlighted, and then press the

(Set)

button.

Press the

button until

Wireless

is highlighted, and then press the

(

Set

) button.

Press the

button until

WPS Setup

is highlighted, and then press the

(Set)

button.

Ensure that

Push Button Control

is highlighted, and then press the

(Set)

button.

Ensure that

Start

is highlighted, and then press the

(Set)

button.

Ensure that the message

Please wait WPS Setting

is displayed, and start the WPS-PBC on the wireless

LAN access point (Registrar) within two minutes.

When the WPS operation is successful and the printer is rebooted, wireless LAN connection setting is completed.

Installing Optional Accessories

Содержание C2660dn










































































































































































































































































































































































Результаты поиска

Содержание C2660dn

Отзывы:

Бренды по названию

Популярные бренды

Dell C2660dn, Руководство пользователя

Результаты поиска

Содержание C2660dn

Отзывы:

Бренды по названию

Популярные бренды