Dell C2660dn Скачать руководство пользователя страница 303

Страница: 303 / 361

NOTE:

You can specify each value for process, left, and right colors (LY, LM, LC, RY, RM, RC, PY, PM, and PC) by repeating the

steps 6 to 8.

NOTE:

The registration values are always shown as 0 the next time you enter the menu.

Press the

button until

Color Regi Chart

is highlighted, and then press the

(Set)

button.

Press the

button until

Yes

is highlighted, and then press the

(Set)

button.

The color registration chart with the new values is printed.

If the straightest line is not at the value of 0, adjust the values again. Checking the charts before and after the

adjustments will help you to determine the values to enter.

When Using the Tool Box

Using the

Tool Box

, enter the values that you found in the color registration chart to make adjustments.

Click

Start

→

All Programs

→

Dell Printers

→

Dell C2660dn Color Laser Printer

→

Tool Box

NOTE:

For details about starting the Tool Box, see "Starting the Tool Box."

The

Tool Box

opens.

Click the

Printer Maintenance

tab.

Select

Maintenance

from the list at the left side of the page.

The

Maintenance

page is displayed.

Specify each value for process, left, and right colors in

Registration Adjustments

under

Color Registration

Adjustments

, and then click

Apply New Settings

Click

Start

next to

Print Color Regi Chart

under

Color Registration Adjustments

The color registration chart is printed with the new values.

Adjust till all straight lines are at the value of 0. Show image of before and after adjustment will help.

After printing the color registration chart, do not turn off the printer until the printer motor has stopped running.

NOTE:

is not next to the straightest lines, determine the values and adjust the printer again.

Maintaining Your Printer

301

Содержание C2660dn










































































































































































































































































































































































Результаты поиска

Содержание C2660dn

Отзывы:

Бренды по названию

Популярные бренды

Dell C2660dn, Руководство пользователя

Результаты поиска

Содержание C2660dn

Отзывы:

Бренды по названию

Популярные бренды