Dell C2660dn Скачать руководство пользователя страница 239

Страница: 239 / 361

Printer Status Image Area

Displays the image of printer condition.

•

Estimated Toner Level image
Displays the estimated toner level of each color if the printer is functioning properly.

NOTE:

If the utility does not receive a response from the printer, the Unknown toner image is displayed.

•

Printer error image
Displays an indication image when an error occurs.

An error has occurred and the printer cannot be used.

Order Supplies button

Click this button to display the

Order

window.

To hide the

Order

window, click

Order Supplies

again.

Info (i) button

Click this button to open

Preferences

NOTE:

The info (i) button appears on the lower-right corner of the window when the cursor is over the Printer Status window.

The info (i) button is a standard used across all widgets.

Order Window

This window provides you with the information for ordering printer supplies by telephone or from the web site.
To open the

Order

window:

Click

Order Supplies

in the

Printer Status

window.

The

Order

window appears.

NOTE:

The Order window appears when low toner is detected.

Understanding Your Printer Software

237

Содержание C2660dn










































































































































































































































































































































































Результаты поиска

Содержание C2660dn

Отзывы:

Бренды по названию

Популярные бренды

Dell C2660dn, Руководство пользователя

Результаты поиска

Содержание C2660dn

Отзывы:

Бренды по названию

Популярные бренды