Dell B1165nfw, Руководство пользователя

Страница: 165 / 303

Wireless network setup
165
2. Using a Network-Connected Machine
7 After searching the wireless networks, a list of wireless networks your
machine has searched appears.
If you want to use the Dell default ad hoc setting, select the last wireless
network on the list,
Network Name(SSID) is Dell_device and Signal is
Printer Self Network
.
Then, click Next .
If you want to use other ad hoc settings, select another wireless network
from the list.
If you want to change ad hoc settings click the Advanced Setting button.
• Enter the wireless Network Name: Enter the SSID name you want (SSID
is case-sensitive).
•
Operation Mode:
Select ad hoc.
• Channel: Select the channel. ( Auto Setting or 2412 MHz to 2467 MHz).
• Authentication: Select an authentication type.
Open System: Authentication is not used, and encryption may or may
not be used, depending on the need for data security.
Shared Key: Authentication is used. A device that has a proper WEP key
can access the network.
• Encryption: Select the encryption (None, WEP64, WEP128).
•
Network Key:
Enter the encryption network key value.
• Confirm Network Key: Confirm the encryption network key value.
• WEP Key Index: If you are using WEP Encryption, select the appropriate
WEP Key Index .
The wireless network security window appears when the ad hoc network
has security setting.
The wireless network security window appears. Select
Open System
or
Shared Key
for the authentication and click
Next
.
• WEP (Wired Equivalent Privacy) is a security protocol preventing
unauthorized access to your wireless network. WEP encrypts the data
portion of each packet exchanged on a wireless network using a 64-bit
or 128-bit WEP encryption key.
8
The window showing the wireless network setting appears. Check the
settings and click
Next .
Before entering the IP address for the machine, you must know the
computer’s network configuration information. If the computer’s network
configuration is set to DHCP, the wireless network setting should also be
DHCP. Likewise, if the computer’s network configuration is set to Static, the
wireless network setting should also be Static.
If your computer is set to DHCP and you want to use the Static wireless
network setting, you must contact the network administrator to get the
static IP address.
• For the DHCP method
If the IP address assignment method is DHCP, check if DHCP is shown in
the
Wireless Network Setting Confirm window. If it shows Static, click
Change TCP/IP
to change the assignment method to
Receive IP
address automatically (DHCP)
.