Dell 3333DN Скачать руководство пользователя страница 65

Страница: 65 / 303

Changing port settings after installing a new

network Internal Solutions Port

When a new network Internal Solutions Port (ISP) is installed in the printer, the printer is assigned a new IP address.

The printer configurations on computers that access the printer must be updated with this new IP address in order

to print to it over the network.

Notes:

•

If the printer has a static IP address that will stay the same, then you do not need to make any changes to the

computer configurations.

•

If the computers are configured to print to the printer by a network name that will stay the same, instead of by

IP address, then you do not need to make any changes to the computer configurations.

•

If you are adding a wireless ISP to a printer previously configured for a wired connection, then make sure the

wired network is disconnected when you configure the printer to operate wirelessly. If the wired connection

remains connected, then the wireless configuration will complete, but the wireless ISP will not be active. In the

event that the printer was configured for a wireless ISP while still attached to a wired connection, disconnect

the wired connection, turn the printer off, and then turn the printer back on again. This will enable the wireless

ISP.

•

Only one network connection at a time is active. If you want to switch the connection type between wired and

wireless, you must first turn the printer off, connect the cable (to switch to a wired connection) or disconnect

the cable (to switch to a wireless connection), and then turn the printer back on again.

For Windows users

Print a network setup page and make a note of the new IP address.

Click , or click Start and then click Run.

In the Start Search or Run box, type

control printers

Press Enter, or click OK.
The printer folder opens.

Locate the printer that has changed.

Note: If there is more than one copy of the printer, then update all of them with the new IP address.

Right-click the printer.

Click Properties.

Click the Ports tab.

Locate the port in the list, and then select it.

Click Configure Port.

Type the new IP address in the “Printer Name or IP Address” field. You can find the new IP address on the network

setup page you printed in step 1.

Click OK, and then click Close.

Additional printer setup

Содержание 3333DN
















































































































































































































































































































Результаты поиска

Содержание 3333DN

Отзывы:

Похожие инструкции для 3333DN

Бренды по названию

Популярные бренды

Dell 3333DN, Руководство пользователя

Результаты поиска

Содержание 3333DN

Отзывы:

Похожие инструкции для 3333DN

Бренды по названию

Популярные бренды