You will also need to allocate and setup a static IP address on your Dell Wireless 2350 Broadband Router. Perform the
following steps to configure a static IP address:
NOTE:
The IP address that you use should be reserved by the DHCP server in your existing network. The router cannot act
as a DHCP client and therefore, it needs a static IP address for its LAN interface.
1. Go to the
Advanced Settings
menu option tab on the top navigation bar and wait for the menu to appear.
2. Click the
Advanced IP Settings
menu option in the drop down menu.
3. Make sure that the box
Automatically obtain an IP address from a DHCP server
is unchecked.
4. Assign an IP address to the router.
4. Click the
Submit
button.
5. A pop-up
Warning
window will appear. Click the
OK
button.
6. A
NOTE
page will appear with the instructions on how to refresh the IP address of your computer.
7. Click the
Continue
button.
8. When your web browser returns to the home page of the Dell Wireless 2350 Broadband Router, the device has
successfully restarted with the new settings.
9. Plug an Ethernet cable from the existing local network into any
LAN
port on the router.
Back to Contents Page
Содержание 2350 - Wireless WLAN Broadband Router
