22
|
Getting started
Scan power save mode
Scan Power Save mode allows you to save power by turning off the
scan lamp. The scan lamp under the scanner glass automatically turns
off when it is not in actual use to reduce power consumption and
extends the life of the lamp. The lamp automatically wakes up after
some warm-up time when you start scanning.
You can set the length of time for which the scan lamp waits after a scan
job is completed before it switches to the power save mode.
1.
Press
Menu
(
)
until
System Setup
appears on the bottom line of
the display and press
OK
.
2.
Press
OK
when
Machine Setup
appears.
3.
Press the left/right arrow until
Scan PWR Save
appears and press
OK
.
4.
Press the left/right arrow until the time setting you want appears and
press
OK
.
5.
Press
Stop/Clear
(
)
to return to Ready mode.
Setting print job timeout
You can set the amount of time a single print job is active before it must
print.The printer handles incoming data as a single job if it comes in within
the specified time. When an error occurs while processing data from the
computer and the data flow stops, the printer waits the specified time and
then cancels printing if data flow does not resume.
1.
Press
Menu
(
)
until
System Setup
appears on the bottom line of the
display and press
OK
.
2.
Press
OK
when
Machine Setup
appears.
3.
Press the left/right arrow until
Job Timeout
appears and press
OK
.
4.
Press the left/right arrow until the time setting you want appears and
press
OK
.
5.
Press
Stop/Clear
(
)
to return to Ready mode.
Auto continue
This is the option to set the printer to continue printing or not, in case the
paper size you have set and the paper within the tray mismatches.
1.
Press
Menu
(
)
until
System Setup
appears on the bottom line of the
display and press
OK
.
2.
Press
OK
when
Machine Setup
appears.
3.
Press the left/right arrow until
Auto Continue
appears and press
OK
.
4.
Press the left/right arrow until the binding option you want appears.
•
On:
Automatically prints after set time passes, when the paper size
mismatches the tray paper size.
•
Off:
Waits until you press
Black Start
(
)
or
Color Start
(
)
on
the control panel, when the paper size mismatches the tray paper
size.
5.
Press
OK
to save your selection.
6.
Press
Stop/Clear
(
)
to return to Ready mode.
Changing the font setting
Your printer has preset the font for your region or country.
If you want to change the font or set the font for special condition such as
the DOS environment, you can change the font setting as follows:
1.
Ensure that you have installed the printer driver from the provided
Drivers and Utiltiies
CD.
2.
Click
Start
→
All Programs
→
DELL
→
DELL Printers
→
Dell 2145cn
Color Laser MFP
→
Printer Setting Utility
.
You can also click
Printer Setting Utility
on the status bar in Mac OS X
(or Notification Area in Linux).
3.
Click
Printer Setting Utility
.
4.
Click
Emulation
.
5.
Confirm if
PCL
is selected in
Emulation Setting
.
6.
Click
Setting
.
7.
Select your preferred font in the
Symbol set
list.
8.
Click
Apply
.
Following information shows the proper font list for corresponding
languages.
•
Russian: CP866, ISO 8859/5 Latin Cyrillic
•
Hebrew: Hebrew 15Q, Hebrew-8, Hebrew-7 (Israel only)
•
Greek: ISO 8859/7 Latin Greek, PC-8 Latin/Greek
•
Arabic & Farsi: HP Arabic-8, Windows Arabic, Code Page 864,
Farsi, ISO 8859/6 Latin Arabic
•
OCR : OCR-A, OCR-B