Dell 2145 Color Laser Скачать руководство пользователя

Страница: 58 / 141

Maintenance

Cleaning the scan unit

Keeping the scan unit clean helps ensure the best possible copies. We

suggest that you clean the scan unit at the start of each day and during the

day, as needed.

Slightly dampen a soft lint-free cloth or paper towel with water.

Open the scanner lid.

Wipe the surface of the scanner glass and DADF glass until it is clean

and dry.

Wipe the underside of the scanner lid and white sheet until it is clean

and dry.

Close the scanner lid.

MAINTAINING THE CARTRIDGE

Toner cartridge storage

To get the most from the toner cartridge, keep the following guidelines in

mind:
•

Do not remove the toner cartridge from its package until ready for use.

•

Do not refill the toner cartridge. The printer warranty does not cover

damage caused by using a refilled cartridge.

•

Store toner cartridges in the same environment as your printer.

•

To prevent damage to the toner cartridge, do not expose it to light for

more than a few minutes.

Expected cartridge life

The life of the toner cartridge yield depends on the amount of toner that print

jobs require. The actual number may also be different depending on the

print density of the pages you print on, and the number of pages may be

affected by operating environment, printing interval, media type, and media

size. If you print a lot of graphics, you may need to change the cartridge

more often.

Redistributing toner

When a toner is low, faded or light areas may appear. It is possible that

colored images may be printed with incorrect colors due to flawed mixing of

toner colors when one of the colored toner cartridges is low on toner. You

can temporarily improve print quality by redistributing the toner.
•

The toner-related message saying that the toner is low may appear on

the display.

Using the handle, completely open the front cover.

Scanner lid

Scanner glass

White sheet

DADF glass

•

Do not touch the green surface, the OPC drum or the front of the

toner cartridge, with your hands or any other material. Use the

handle on each cartridge in order to avoid touching this area.

•

Be careful not to scratch the surface of the paper transfer belt.

•

If you leave the front cover open for more than a few minutes, the

OPC drum can be exposed to light. This will cause damage to the

OPC drum. Close the front cover should the installation need to

be halted for any reason.

Содержание 2145 Color Laser














































































































































Результаты поиска

Содержание 2145 Color Laser

Отзывы:

Похожие инструкции для 2145 Color Laser

Бренды по названию

Популярные бренды

Dell 2145 Color Laser, Руководство пользователя

Результаты поиска

Содержание 2145 Color Laser

Отзывы:

Похожие инструкции для 2145 Color Laser

Бренды по названию

Популярные бренды