Dell EMC PowerProtect X400, Руководство по конфигурации и установке оборудования

Страница: 19 / 76

Figure 7 X400 platform cube sled rear view
Item Panel, Ports, and Slots Icon Description
1 Mezzanine card slot N/A SAS HBA330 storage controller
2 Sled release handle N/A Enables you to remove the sled from the enclosure.
3 10/25 GbE port configured to run
at 10 GbE (2) N/A Left port connects to external network, right port connects to internal
network.
4 Sled release lock N/A Enables you to remove the sled from the enclosure.
5 Rear power button N/A Enables you to power on the sled while accessing it from the rear.
6 iDRAC dedicated management
network port Enables you to remotely access iDRAC. For more information, see the
Integrated Dell Remote Access Controller 9 (iDRAC9) User’s Guide .
7 Mini display port Enables you to connect a display device to the system.
8 iDRAC Direct micro USB port Enables you to connect a portable device to the sled.
9 10 GbE port (2) N/A Left port connects to internal network, right port connects to external
network.
10 Information tag (luggage tag) pull
out tab N/A This tab has the sled serial number, sled part number, Express Service
Code, Service Tag, and MAC address labels.
11 System identification indicator The System Identification (ID) LED is available on the back of the
system. Press the system ID button on the front of the enclosure to
identify a system in a rack.
12 USB 3.0 port (2) Do not use the two USB ports on the X400 platform cube sleds.
X400 Appliance serial number
The X400 Appliance serial number is a 14-character mix of letters and numbers used to
identify the X400 Appliance to Dell EMC support. It is located on the information tag
pull out tab on the front of the X400 platform cube (near slot 11 in the bottom right
corner). For the location of the information tag, see
Figure 1 on page 15. The appliance
Hardware specifications
PowerProtect X400 Appliance Hardware Configuration and Installation Guide 19