Dell EMC PowerProtect X400, Руководство по конфигурации и установке оборудования

Страница: 31 / 76

Note: Install the left rail assembly first.
2. Fully extend the rear sliding bracket of the rail.
3. Position the rail end piece labeled Left Front facing inward and orient the rear
end piece to align with the holes on the rear rack flanges.
4. Push the rail straight toward the rear of the rack until the latch locks in place.
Figure 19 Installing the rear end of the rail
5. For the front end piece, rotate the latch outward and pull the rail forward until
the pins slide into the flange, and release the latch to secure the rail in place.
Figure 20 Installing the front end of the rail
6. Repeat the preceding steps to install the right rail assembly.
Install X400 cubes in the rack
PowerProtect X400 Appliance Hardware Configuration and Installation Guide 31