Table 8. Features available on the back view
Item
Panels, ports and slots
Icon
Description
1
Full-height PCIe expansion
card slot (3)
N/A
The PCIe expansion card slot (riser 1) connects up to three full-height
PCIe expansion cards to the system. For more information, see the
Expansion card installation guidelines
section.
2
Half-height PCIe expansion
card slot
N/A
The PCIe expansion card slot (riser 2) connects one half-height PCIe
expansion cards to the system. For more information, see the
section.
3
Rear handle
N/A
The rear handle can be removed to enable any external cabling of PCIe
cards that are installed in the PCIe expansion card slot 6.
4
Full-height PCIe expansion
card slot (2)
N/A
The PCIe expansion card slot (riser 2) connects up to two full-height
PCIe expansion cards to the system. For more information, see the
Expansion card installation guidelines
section.
5
Full-height PCIe expansion
card slot (2)
N/A
The PCIe expansion card slot (riser 3) connects up to two full-height
PCIe expansion cards to the system. For more information, see the
Expansion card installation guidelines
section.
6
Power supply unit (2)
N/A
For more information, see the
section.
7
NIC port
The NIC ports that are integrated on the network daughter card (NDC)
provide network connectivity. For more information about the supported
configurations, see the
section.
8
USB port (2)
The USB ports are 9-pin and 3.0-compliant. These ports enable you to
connect USB devices to the system.
9
VGA port
Enables you to connect a display deviceto the system. For more
information, see the
section.
10
Serial port
Enables you to connect a serial device to the system. For more
information, see the
section.
11
iDRAC9 dedicated port
Enables you to remotely access iDRAC. For more information, see the
iDRAC User’s Guide at
Dell.com/idracmanuals
.
12
System identification button
Press the system ID button:
•
To locate a particular system within a rack.
•
To turn the system ID on or off.
To reset iDRAC, press and hold the button for more than 15 seconds.
NOTE:
To reset iDRAC using system ID, ensure that the system
ID button is enabled in the iDRAC setup.
NOTE:
If the system stops responding during POST, press and
hold the system ID button (for more than five seconds) to enter
the BIOS progress mode.
13
Drive slots (3.5 inch or 2.5
inch drives)
N/A
Enable you to install drives that are supported on your system. For more
information about drives, see the
section.
PowerEdge R7425 system overview
17
Содержание PowerEdge R7425
Страница 9: ...Figure 1 Supported configuration PowerEdge R7425 system overview 9 ...
Страница 44: ...Option Description ...
