29
5 How to adjust the limit switche
1. Scroll down the parameters untill you visualize
P001;
2. confirm by pressing the key;
3. by pressing (
OPEN
) and (
CLOSE
), move the
leaf in the opening position and adjust the limit
switch cam so that it pushes the microswitch in that
point;
Repeat adjusting the closing limit switch.
4. Confirm by pressing the key (display shows again
P001).
6 Motor stroke learning
1. Make sure you have properly adjusted the opening/closing limit switches cams;
2. Scroll down the parameters with and keys until you visualise P003;
3. Access the parameter by pressing the key;
4. When “
” flashes, continue pressing the key;
5. Release the key when “
” stops flashing; Start the learning procedure with operator 1 opening;
6. Wait for the door searches and stops on the opening stop and then on the closing stop.
7. Once the procedure is ended, the display will show “- - - - “.
7 Transmitters learning
7.1 Transmitters coding selection
1. Scroll down the parameters with and keys until you visualise
P027;
2. Confirm by pressing on the key;
3. Select the type of transmitter by scrolling and keys:
- d000=fix rolling-code (
suggested
);
- d001=complete rolling-code;
- d002=dip-switch;
4. Confirm by pressing on the key (display shows again P027).
Warning:
If you need to vary the type of encoding, and only if other remo-
tes with different encoding are memorized, you need to erase memory
(P004)
AFTER
you have set the new encoding.
Содержание LIVI 403E - 6NET
