28
6 STANDARD PROGRAMMING
1 Power Supply
Give power supply, the display shows the following symbols “
”, “
”, “
” and then “- - - - ”.
*
If the control panel has already been programmed and the power fails or is switched off - once power is returned and a START command
is given, the position reset procedure is performed (see “rESP” in the table “WORKING STATUS MESSAGES” on page 34.
2 Visualisation of inputs and operations-counter status
1. Scroll the parameters with the and keys until the
screen reads P013;
2. Access the parameter by pressing the button;
3. The “Input Status” is shown on the screen (check that
this is correct):
4. Press the button again;
5. The “Total Operation Counter” is shown on the screen
(* see P064):
Ex:
= 3x1000* = 3000 operations executed
6. Press the button again;
7. The “Maintenance Operation Counter” is shown on the
screen (* see P065):
Ex:
= 5*x500 = 2500 operations still to be car-
ried out before the maintenance intervention request (
= maintenance operation counter disabled)
8. Press the button again to exit the parameters (P013
is shown on the screen again).
3 Selection type of operators
! IMPORTANT !
1. Scroll down the parameters with
and
keys until you visualise
P028;
2. Access the parameter by pressing the key;
3. Acting on and keys, set:
- d005 = LIVI 5/24 - 6NET
- d006 = LIVI 8/24 - 9NET
4. Confirm your choice by pressing the
key (display returns again to
P028).
4 Selection of direction of motion
1. Scroll down the parameters with
and
keys
until you visualise P063;
2. Access the parameter by pressing the key;
3. Acting on and keys, set:
- d000=motor in standard position (on the left of
the gap);
- d001=motor in inverted position (on the right of
the gap);
4. Confirm your choice by pressing the key (display
returns again to P063).
Warning:
The parameter automatically reverses the
motors output open/close and any limit switch input
open/close.
Содержание LIVI 403E - 6NET
