™
Akagi: Step by Step
203
ｄ
ａ
ｃ
ｊ
ｈ
ｉ
ｌ
ｋ
ｅ
ｆ
ｇ
Finishing the hangar tray: Steps 16-17
Test-fit and glue wall “d” in place.
Complete this side by testing and then gluing walls “g”, “f” and “e”
into place, in that order.
Identify any gaps between the walls and fill with either spare bits
of wood or with putty for smaller gaps.
Test-fit and glue into place walls “a” and “c,” on either side of wall “b.”
Test-fit walls “h,” “i” and “j” in place. You will need to shape the
edges to diagonals to achieve a better fit (inset). Glue into place.
Tape up the sides of the assembly, as with the assembly on page
199, turn upside down and spray with gray paint.
Test-fit and shape the edges of walls “k” and “l,” then glue into place.
Touch up any of the gaps you filled, or any other areas of wood
where you can see the white paint, to match the rest of the walls.
14
15
13
12
16
17
10
11
