DayStar Digital TURBO 040, Руководство пользователя

Страница: 55 / 132

3. Remove the screw on each corner of the
disk tray (total of 4) that attach the tray to
the M acintosh IIx. Be careful not to drop the
screws into the machine. Place the screws in
a safe place so they can be replaced once the
installation is complete.
remove four
phillips head
screws
Figure 28 - View o f the disk tray
4. Find where the disk drive cables connect to
the motherboard. You must put them back
in the sam e place. Unplug the floppy disk
drive cable. Unplug the hard disk cable by
sw inging the two latch locks outward on
the hard drive connector. Detach the hard
drive’
s power plug from the motherboard.
R em oving
the
drive tray
disconnect
power cable
from mother­
board
disconnect
ribbon cables
from mother­
board
Figure 29 - View o f the cables
CHAPTER 4
Installing The Turbo 040 - Macintosh IIx