DayStar Digital TURBO 040, Руководство пользователя

Страница: 45 / 132

4. W hile gently pressing the sides of the tool
inward, slow ly slide it until the teeth of the
tool are firmly seated under the lip of the chip.
Figure 20 - Inner tool over processor
5. At a 90 degree angle, place the outer tool
over the inner tool that is seated on the chip.
The tool should rest on the m otherboard
and not on any other chips. Put the w in g
nut on the threaded piece.
Figure 2 1 - Outer tool over processor
C H A P T E R 3
Installing The Turbo 040 - Macintosh II