DAVIS TECHNOLOGIES TC-3 Series, Инструкция по эксплуатации

Страница: 51 / 60

50
TC3 Series Traction Control
www.moretraction.com
If desired, you may want to set up outputs from the
Holley to trigger the ARM and Trans Sync Inputs.
Configure the ARM output (TC3 Arm) to trigger at
80% throttle position, and the TB Sync output (TC3
Launch) to trigger whenever TB button is pressed.
It is also very useful to set up a Data Monitor
Window to test all inputs and outputs of the Holley
EFI.
Note- The ignition timing parameter displayed will
not change unless the engine is running.