DAVIS TECHNOLOGIES TC-3 Series, Инструкция по эксплуатации

Страница: 38 / 60

37
TC3 Series Traction Control
www.moretraction.com
SmartDrop® is used to make a stronger correction
than timing retard. If a correction is active, and the
RPM spike exceeds the Correction Spread Value,
then SmartDrop® is initiated. If spread is set to 150,
then at 151 RPM the first level of SmartDrop® will be
triggered. After that, if the RPM continues to spike,
the SmartDrop® will increase to the next level when
the RPM increases another ½ of the correction
spread setting. So, if spread = 150, then
SmartDrop® will increase every 75 RPM. The
SmartDrop® will only increase in level to the Max SD
Limit. SmartDrop® 0=Retard Only
Example
(correction spread 150 / SD increase every 75)
-
Spike up to 150 RPM=Retard Only
Spike of 151-225 RPM=Full Retard and SD level 1
Spike of 226-300 RPM=Full Retard and SD level 2
Spike of 301-376 RPM=Full Retard and SD level 3
Spike of 377-xxx RPM=Full Retard and SD level 4
Max SD
Save
+
-
0
Max Amount Of SmartDrop
Allowed. Begins Above
Correction Spread
1= 1 out of 8 cylinders
2= 2 out of 8 cylinders
3= 3 out of 8 cylinders
4= 4 out of 8 cylinders
(1-4, Default = 0)