DAVIS TECHNOLOGIES TC-3 Series, Инструкция по эксплуатации

Страница: 50 / 60

49
TC3 Series Traction Control
www.moretraction.com
Appendix D
Holley EFI Config
When the TC3 is connected to a Holley EFI, you
must install the Traction Control ICF using the
Toolbox icon, and select “Profiler w/ SmartDrop®”
This will create the required input Pins. Drag the
Inputs to the desired “F” type (frequency) pin and
connect the corresponding TC3 output to the
appropriate pin. The Holley EFI is now configured to
receive signals from the TC3 to initiate Timing
Retard (25 deg retard Max) or SmartDrop®.