
Installation and maintenance guide
Figure 30. Setting : Barrel PAGE
Figure 30. Setting : Barrel PAGE
8.5 BARREL
SETTING PAGE
8.6 SETTING :
SIGNAL PAGE
CATEGORY
CATEGORY
BARREL 3 CC setting
Enable/disable the SHOT SWITCH for dispensing on the DA 1000V CONTROLLER front panel
3 CC
SHOT
5 CC
FOOT
10 CC
BARREL 10 CC setting
EXTERNAL
Enable/disable the External INPUT EXTERNAL SHOT for dispensing
BARREL 5 CC setting
Enable/disable the FOOT SWITCH for dispensing on the DA 1000V CONTROLLER rear panel
30 CC
BARREL 30 CC setting
DESCRIPTION
DESCRIPTION
NANO PENNANOPEN Operation Manual
Doc. Rev 0
2019/7/2
41/47
Copyright © 2019 by TAEHA CORP. All Rights Reserved
Figure 30. Setting : Barrel PAGE
This is the PAGE to configure the Barrel capacity according to the Nano Pen capacity.
Category
Description
3 CC
BARREL 3 CC setting
5 CC
BARREL 5 CC setting
10 CC
BARREL 10 CC setting
30 CC
BARREL 30 CC setting
NANO PENNANOPEN Operation Manual
Doc. Rev 0
2019/7/2
42/47
Copyright © 2019 by TAEHA CORP. All Rights Reserved
7.6
SETTING : SIGNAL PAGE
Figure 31. Setting : SIGNAL PAGE
Sets the Dispensing Mode for the NPC-10.
Category
Description
SHOT
Enable/disable the SHOT SWITCH for dispensing on the
NPC-10 front panel
FOOT
Enable/disable the FOOT SWITCH for dispensing on the
NPC-10 rear panel
EXTERNAL
Enable/disable the External INPUT EXTERNAL SHOT for
dispensing
The INTERVAL MODE SETTING PAGE is the PAGE to configure the repeated dispensing conditions.
The INTERVAL MODE SETTING PAGE is the PAGE to configure the repeated dispensing conditions.