
Installation and maintenance guide
NANO PENNANOPEN Operation Manual
Doc. Rev 0
2019/7/2
26/47
Copyright © 2019 by TAEHA CORP. All Rights Reserved
6.4
Setting Dispensing Conditions and Discharging
Figure 16. Setting Dispensing Conditions
After setting the dispensing conditions as shown in Figure 16, set the dispensing mode as shown in
Figure 17 and execute the dispensing.
→
When changing the dispensing mode, change the dispensing mode by releasing the LOCK button
at the bottom of the HOME PAGE.
Figure 17. Setting Dispensing Mode
7.4 Setting Dispensing Conditions and Discharging
NANO PENNANOPEN Operation Manual
Doc. Rev 0
2019/7/2
26/47
Copyright © 2019 by TAEHA CORP. All Rights Reserved
6.4
Setting Dispensing Conditions and Discharging
Figure 16. Setting Dispensing Conditions
After setting the dispensing conditions as shown in Figure 16, set the dispensing mode as shown in
Figure 17 and execute the dispensing.
→
When changing the dispensing mode, change the dispensing mode by releasing the LOCK button
at the bottom of the HOME PAGE.
Figure 17. Setting Dispensing Mode
Figure 16. Setting Dispensing Conditions
After setting the dispensing conditions as shown in Figure 16, set the dispensing mode
as shown in Figure 17 and execute the dispensing.
> When changing the dispensing mode, change the dispensing mode by releasing the LOCK button
at the bottom of the HOME PAGE.
Figure 17. Setting Dispensing Mode