
Installation and maintenance guide
CATEGORY
> If the SPEED text box is touched, the setting will switch to STEP.
The DA 1000V can be operated with the desired number of STEPs by inser-
ting the number of DA 1000V operations.
> The pen will operate based on the SPEED value set in the SPEED text box.
> If the STEP text box is touched, the setting will change back to SPEED.
The SPEED is displayed as numerical values for each speed unit.
The operating speed of the DA 1000V can be increased or decreased.
> Left button: decrease, Right button: increase
Displays the number of DA 1000V operation steps.
This is an alarm window that appears when DA 1000V Controller alarm is on.
> Go to the ALARM PAGE and check the alarm status.
DESCRIPTION
NANO PENNANOPEN Operation Manual
Doc. Rev 0
2019/7/2
34/47
Copyright © 2019 by TAEHA CORP. All Rights Reserved
→
If the SPEED text box is touched, the setting will switch to
STEP.
The Nano Pen can be operated with the desired number of STEPs
by inserting the number of Nano Pen operations.
→
The pen will operate based on the SPEED value set in the
SPEED text box.
→
If the STEP text box is touched, the setting will change back
to SPEED.
The SPEED is displayed as numerical values for each speed unit.
The operating speed of the Nano Pen can be increased or
decreased.
→ Left button: decrease, Right button: increase
Displays the number of Nano Pen operation steps.
This is an alarm window that appears when NPC-10 alarm is on.
→ Go to the ALARM PAGE and check the alarm status.
NANO PENNANOPEN Operation Manual
Doc. Rev 0
2019/7/2
34/47
Copyright © 2019 by TAEHA CORP. All Rights Reserved
→
If the SPEED text box is touched, the setting will switch to
STEP.
The Nano Pen can be operated with the desired number of STEPs
by inserting the number of Nano Pen operations.
→
The pen will operate based on the SPEED value set in the
SPEED text box.
→
If the STEP text box is touched, the setting will change back
to SPEED.
The SPEED is displayed as numerical values for each speed unit.
The operating speed of the Nano Pen can be increased or
decreased.
→ Left button: decrease, Right button: increase
Displays the number of Nano Pen operation steps.
This is an alarm window that appears when NPC-10 alarm is on.
→ Go to the ALARM PAGE and check the alarm status.
NANO PENNANOPEN Operation Manual
Doc. Rev 0
2019/7/2
34/47
Copyright © 2019 by TAEHA CORP. All Rights Reserved
→
If the SPEED text box is touched, the setting will switch to
STEP.
The Nano Pen can be operated with the desired number of STEPs
by inserting the number of Nano Pen operations.
→
The pen will operate based on the SPEED value set in the
SPEED text box.
→
If the STEP text box is touched, the setting will change back
to SPEED.
The SPEED is displayed as numerical values for each speed unit.
The operating speed of the Nano Pen can be increased or
decreased.
→ Left button: decrease, Right button: increase
Displays the number of Nano Pen operation steps.
This is an alarm window that appears when NPC-10 alarm is on.
→ Go to the ALARM PAGE and check the alarm status.
NANO PENNANOPEN Operation Manual
Doc. Rev 0
2019/7/2
34/47
Copyright © 2019 by TAEHA CORP. All Rights Reserved
→
If the SPEED text box is touched, the setting will switch to
STEP.
The Nano Pen can be operated with the desired number of STEPs
by inserting the number of Nano Pen operations.
→
The pen will operate based on the SPEED value set in the
SPEED text box.
→
If the STEP text box is touched, the setting will change back
to SPEED.
The SPEED is displayed as numerical values for each speed unit.
The operating speed of the Nano Pen can be increased or
decreased.
→ Left button: decrease, Right button: increase
Displays the number of Nano Pen operation steps.
This is an alarm window that appears when NPC-10 alarm is on.
→ Go to the ALARM PAGE and check the alarm status.
NANO PENNANOPEN Operation Manual
Doc. Rev 0
2019/7/2
34/47
Copyright © 2019 by TAEHA CORP. All Rights Reserved
→
If the SPEED text box is touched, the setting will switch to
STEP.
The Nano Pen can be operated with the desired number of STEPs
by inserting the number of Nano Pen operations.
→
The pen will operate based on the SPEED value set in the
SPEED text box.
→
If the STEP text box is touched, the setting will change back
to SPEED.
The SPEED is displayed as numerical values for each speed unit.
The operating speed of the Nano Pen can be increased or
decreased.
→ Left button: decrease, Right button: increase
Displays the number of Nano Pen operation steps.
This is an alarm window that appears when NPC-10 alarm is on.
→ Go to the ALARM PAGE and check the alarm status.