pag
. 17
DA1000V VOLUMETRIC MANUAL DISPENSING SYSTEM
7.1 Initial Power Input
7 OPERATION OF THE EQUIPMENT
7.2 DA 1000V Capacity Setting
NANO PENNANOPEN Operation Manual
Doc. Rev 0
2019/7/2
22/47
Copyright © 2019 by TAEHA CORP. All Rights Reserved
6
Operation of the Equipment
6.1
Initial Power Input
Figure 8. Initial power input screen
When the initial power input is provided by turning on the POWER SWITCH at the back of NPC-10, the
INTRO PAGE will be shown for 5 seconds, after which the screen will switch to the HOME PAGE screen, and
information will be shown in each display window.
6.2
Nano Pen Capacity Setting
Figure 9. Setting the Capacity before using the Nano Pen
The Capacity can be set for the Nano Pen on the NPC-10 before using the Nano Pen.
→ Go to Set
ting: Barrel PAGE as shown in Figure 9 and set the corresponding capacity value.
Figure 8. Initial power input screen
When the initial power input is provided by turning on the POWER SWITCH at the back of DA 1000V Controller, the
INTRO PAGE will be shown for 5 seconds, after which the screen will switch to the HOME PAGE screen, and informa-
tion will be shown in each display window.
Figure 9. Setting the Capacity before using the Nano Pen
The Capacity can be set for the DA 1000V on the DA 1000V Controller before using the DA 1000V.
> Go to Setting: Barrel PAGE as shown in Figure 9 and set the corresponding capacity value.