DATREND Systems vPad-Mini, Руководство по эксплуатации

Страница: 37 / 54

vPad-Mini OPERATORS MANUAL
Figure 42
Note that the search is case insensitive.
Touch on the desired value in the List to accept it as the input and return to the Equipment Information
screen.
When all of the parameters deemed necessary have been entered, touch the
Accept
button on the
Equipment Information screen, Figure 35 . The
Abort
button is equivalent to Cancel, and will return to the
Main Screen, Figure 34 .
The
Load Last
button allows you to copy the equipment information data (except Serial Number) from the
last test that was completed and
Saved
. This is useful if you are performing incoming inspections on
multiple new devices, and wish to ‘cut and paste’ the last equipment information data to the next test. Note
that the test must be
saved
to store the equipment information data to memory for later recall.
Accepting the Equipment Information will move forward to the test definition screen, Figure 45 .
If an Equipment ID Number is entered that has been tested before and the Edit Info button is checked, a
dialog will be presented requesting confirmation that the historical data from the last test should be used for
this test. One dialog is presented for the Equipment Information and one for the Test Protocol. These
dialogs are shown below.
Operation/Chapter 4
#
Page 29