Datcon DT4120 Series, Руководство по эксплуатации

Страница: 64 / 92

DT4120 xx xx (PS)
64
20170324-V0
MODBUS respons delay-
time setting (ms)
Sequence of operations 18. Keep stepping by pressing the ▲ button as long as you
see this menu item:

( M ODBUS Wait = MODBUS
wait).
19. Enter the menu item by pressing the
ENTER button.
20. You will see:

on the display. The number on the
left is blinking, signaling that it can be modify.
Here you can set the response delay time in milliseconds
(the delay time between getting a command and sending a
response).
[Factory default: 0 ms. no delay.]
21. Pressing the
► button you can select the next digit.
22. Pressing the ▲ button you can increase the value of the
blinking digit:

,

,

,

,

,

,

,

,

,

,

, etc.
23. after setting the response delay time press MENU
button. The response delay time can be in the 0-255 range.
If you set greater number you will see

error
message and the delay time will be set to 255. Pressing the
MENU button you will see:

and the instrument
exits from the menu item.
Exit from the menu item 1. After finishing the setting, press the MENU button, to exit
from the menu item, and you see this:

.
(2. If you want to change the setting you have performed
just now, or if you just want to check what you have typed
in, continue the operation from
Point 3 of the Sequence of
operations. )
(3. If you do not want to exit from the menu, as you want to
perform further settings, you may press the
▲ button to
select the desired menu items.)
Exit from the menu
Press the MENU button. First the mnemonic

( Save ),
then the mnemonic

( Exit ) are shown on the display.
With this the storing of the settings is completed. The
instrument has exited the menu and goes on with the
measurement.