DT4120 xx xx (PS)
52
20170324-V0
High limit value
Sequence of operation
23. Keep stepping by pressing the
▲
button as long as you
see this sub-menu item:
(
L
imit
1 H
igh
Li
mit = limit
1, high limit value). Here you can define a second numerical
value with which the instrument will compare the displayed
value when the selected operating mode is
or
or
or
. In other operating modes this
value has no effect on the operation.
24. Enter by pressing the
ENTER
button.
25. You see this:
on the display. (If you have
changed the low limit value and the value is greater than the
value of high limit than the low limit value will get the value
of high limit, so the low limit value can not be greater then
the high limit value. The digit at the left side is blinking.
26. Pressing the
►
button you can select the next digit.
27. Pressing the
▲
button you can increase the value of the
blinking digit:
,
,
,
,
,
,
,
,
,
, etc.
28. When the digit on the left side is selected pressing the
▲
button the sequence is as follows:
,
,
,
,
,
,
,
,
,
,
,
, etc.
so you can set any number between -9999-99999.
29. After setting the limit value press
MENU
button to exit
from this sub-menu item and you see this:
.
30. If you don’t want to keep the limit output in on state
(hold mode) while acknowledgement no need further
settings. For finishing the operation, go on with the steps
from the part:
Exit from the menu item
.
Содержание DT4120 Series
