DT4120 xx xx (PS)
20170324-V0
39
Exit from the menu item
1. After finishing the settings, press the
MENU
button to exit
from the given menu item, and you see:
.
Note:
If you enter the same temperature for two or three
correction points the instrument will give an error message:
You will see for two seconds
(fail = fail) on the
display, the message is blinking.
Than you will see
mnemonic on the display. Check
the entered value and correct it.
(2. When you are going to modify the setting go on from the
Sequence of operation
step 3.)
(3. If you don’t want to exit the menu (you want to check the
settings or you want do further settings), then you may
select the desired menu items by pressing the
▲
button.
Exit from the menu
1. Press the
MENU
button. First the mnemonic
(
Save
), then the mnemonic
(
Exit
) are shown on the
display. With this the storing of the settings is completed.
The instrument has exited the menu and goes on with the
measurement.
Содержание DT4120 Series
