V110120E
iBoot-G2+
Page 24
Name
Date
Time
Repeats
Action
1.
Event
Name
mm/dd/yyyy
hh:mm
Annually
Power
On
2.
Event
Name
mm/dd/yyyy
hh:mm
Annually
Power
On
3.
Event
Name
mm/dd/yyyy
hh:mm
Annually
Power
On
4.
Event
Name
mm/dd/yyyy
hh:mm
Annually
Power
On
5.
Event
Name
mm/dd/yyyy
hh:mm
Annually
Power
On
6.
Event
Name
mm/dd/yyyy
hh:mm
Annually
Power
On
7.
Event
Name
mm/dd/yyyy
hh:mm
Annually
Power
On
8.
Event
Name
mm/dd/yyyy
hh:mm
Annually
Power
On
set time server <dotted decimal>
This command is used to set the IP Address of a
network time server.
64.90.182.55
set time enable <yes | no>
This command enables or disables the use of the time
server and scheduled events.
No
get time
Displays the current time and time server (when
enabled)
Current
Time:
16:10:41
01/27/2010
Server:
64.90.182.55
Time
Zone:
‐
4
set event <1-8> date <mm/dd/yyyy>
This command is used to set the scheduled action’s
start date.
set event <1-8> time <hh:mm>
This command is used to set the time the scheduled
action will occur in 24 hour format.
set event <1-8> repeat < minute | hour |
day>
This command is used to set the increments for
repeating scheduled actions
set event <1-8> mult <0-999>
This command sets how often the event will repeat, the
number of increments (as set by the command above)
before the next event.
set event <1-8> action <on | off | cycle >
This command is used to set the scheduled action.
set event <1-8> delete
This command deletes the scheduled action.
Prompts
The CLI will use the following prompts:
User >
This prompts the user to enter his user name (user or
admin). This is the first prompt that the user is
presented with.
Password >
This prompts the user to enter his password.
iBoot >
This is the prompt that will be displayed after the user
has successfully logged in.
iBoot Reboot Required >
This is the prompt that will be displayed whenever
there have been changes made that require a reboot.
This prompt will remain the active prompt until the
iBoot-G2+ has been rebooted.
