V110120E
iBoot-G2+
Page 19
7.10. Event Scheduling
iBoot-G2+ can schedule up to eight
reoccurring power events. Set the
starting date and time, plus the
action to be taken and any repeat
cycle for each.
To enable the time scheduling
function:
Enter an accessible Network Time
Server and check the Enable box.
A list of public time servers is
available at
http://www.ntp.org/
Set
your local time zone relative to
GMT.
Once the time server is active, scheduled events can occur. Up to eight independent scheduled events can be
programmed.
Date: Set the initial date for the event. The format for the date is mm/dd/yyyy.
Time: Set the initial time for the event. The format for the time is hh:mm:ss with hours in 24 hour format.
Repeat: Set the increment of the repeat, if desired. Set the number from 0 to 999 and either Days, Hours, or
Minutes.
Action: Set the event Action; On, Off or Cycle.
Click Save to save the current settings. Click Clear to delete any current schedule.
Note:
All of the Schedule Settings require a reboot of the iBoot-G2+, after clicking Save. A Reboot
button will appear at the bottom of the page. The new settings will not take effect until the unit is
rebooted. Reboot will not affect the power position of the iBoot-G2+. Upon Clicking Reboot, the
Goodbye page is displayed with a link to re-login.
7.11. Passwords
Two passwords are used by iBoot.
The User Password allows access
to the control of iBoot, but not to the
Setup functions. When this
password is used, the main screen
will not have a link to Setup. The
Administrator Password allows
access to both the Main Screen and
the Setup Screen. Passwords can be up to 20 characters long and are case sensitive.
Enter the current password then the new password twice to confirm.
Default Credentials
Role
Username (fixed)
Password (user set)
Administrator admin
admin
User user
user
