V110120E
iBoot-G2+
Page 13
7. Web Setup
iBoot-G2+ setup section consists of several pages. Access any page via the buttons on the left of the page.
Each time a setting is changed click on the Save button for that page to save the changes before moving to the
next page.
7.1. Device
Settings
Location ID: Set a 20 Character name to be
displayed on the top of the Home page. This
assists in identifying which iBoot-G2+ is being
accessed.
Cycle Time: 0 to 999 seconds power cycle time.
This is the length of time the power will be off
during a reboot, or on during a power burst.
Upgrade Enable: Check this box to allow remote firmware upgrades of the iBoot-G2+. When this box is
unchecked, firmware upgrades will not be allowed.
Auto Logout: This setting sets the automatic logout for inactivity on both the web and telnet users. It can be
set from 0 to 99 minutes. 0 disables the Auto Logout feature.
As the iBoot-G2+ allows only one Web user logged in at any time, use caution when disabling the
timeout feature, as it is possible to lock out other users by forgetting to logout. Closing the browser
will not log the user out and will lock out
web access. If you do become locked out,
access the iBoot-G2+ via Telnet and
reboot the unit, or press the reset button.
7.2. Expansion
Settings
Mode: Set iBoot-Exp or Independent I/O mode.
iBoot-Exp displays Exp1 and Exp2 as power On/Off
modules. Independent I/O mode allows
independent monitor of the Inputs and control of
the outputs of Exp1 and Exp2. Features are
dependent on which mode is selected
•
iBoot-Exp Mode: Select Link to Main to have
the status of the Expansion unit be identical to
the Main outlet of iBoot-G2+ . This is
convienient if switching both power supplies of
dual redundant powered devices.
•
Independent I/O: Check Remote Control
Enable to allow external devices to control via
DxP protocol. Leave unchecked to prevent
unwanted control via DxP. To allow the inputs
of Exp1 and Exp2 to control additional devices via DxP Protocol, enter the IP address and relay number of
the device to be controlled.
