Datamax I-class series Скачать руководство пользователя

Страница: 21 / 198

I-Class



The ESCAPE Key moves through previous menu levels to Ready Mode.



The TEST Key terminates printing then restores Menu Mode.

4.1.4 Test Mode:

Printing Test Labels



The DOWN ARROW Key scrolls to the previous test function.



The UP ARROW Key scrolls to the next test function.



The ENTER Key changes the selected test label quantity

(except the Configuration Label, always one), and holding
down the key scrolls the quantities.



The ESCAPE Key exits the Test Mode.



The TEST Key prints the selected label at the selected quantity. During printing, this key

also cancels the test. Pressing and holding it for four seconds initiates printhead cleaning;
see Section 4.2.2.



Note: Test Mode functions are disabled while processing data from communications

interfaces, and printing can be time delayed using the PRINT TEST RATE; see
Section 4.2.7.

Содержание I-class series







































































































































































































Результаты поиска

Содержание I-class series

Отзывы:

Похожие инструкции для I-class series

Бренды по названию

Популярные бренды

Datamax I-class series, Руководство оператора

Результаты поиска

Содержание I-class series

Отзывы:

Похожие инструкции для I-class series

Бренды по названию

Популярные бренды