Datamax I-class series Скачать руководство пользователя

Страница: 177 / 198

Soft Reset - To reset the printer and clear any temporary host settings:

1. With the printer ‘On’, press and hold the

PAUSE and CANCEL buttons

for approximately

four seconds.

When program updates and/or new features are added, they can be downloaded to the printer as

follows:

1) Identify the new version for your model of printer from the Datamax-O’Neil Web site

and download it onto your computer’s hard drive.

2) Launch the NETira CT configuration utility, and query (connect) to the printer, (see section

3.3 for more information on NETira CT).



It is recommended that the configuration be saved before downloading firmware, and restored

when finished. Be sure to check the box labeled “Include Sensor Calibration Data on Open”

when restoring the configuration.

3) Go to the Tools>Upgrade>Firmware.

Select the binary file (BIN file).

4) Click the ‘Send’ button to start the

firmware update.



Be sure only that only one communication cable is connected to the printer before attempting
the firmware upgrade. Do not attempt to send any other data or perform operations via the

front panel when the firmware is downloading.

Содержание I-class series







































































































































































































Результаты поиска

Содержание I-class series

Отзывы:

Похожие инструкции для I-class series

Бренды по названию

Популярные бренды

Datamax I-class series, Руководство оператора

Результаты поиска

Содержание I-class series

Отзывы:

Похожие инструкции для I-class series

Бренды по названию

Популярные бренды