Datalogic Matrix 400, Справочное руководство

Страница: 118 / 142

MATRIX 400™ REFERENCE MANUAL
108
8
Parameters to verify/modify:
 Operating Mode Sets the parameters which customize the reader operating mode
starting from three main modes:
One Shot: acquires a single image based on the selected value
for the Acquisition Trigger and Acquisition Trigger Delay.
Continuous: continuously acquires images with a rate up to the
maximum allowable frame rate per second for the given sensor
depending on the decoding time and the Region of Interest
settings.
Phase Mode: acquires images during the reading phase
depending on the selected value for the Acquisition Trigger and
Acquisition Trigger Delay. The Reading Phase-ON and Reading
Phase-OFF events mark respectively the beginning and end of
the reading phase.
 Calibration Calibrates the acquisition parameters to maximize the reading
performance (see par. 8.4.3).
 Communication Configures the parameters relative to each serial port regarding
the transmission, message formatting and string receiving.
Any change to the VisiSet™ communication port parameters
(baud rate, data bits, etc.) is effective as soon as the reader is
disconnected from VisiSet™.
 Ethernet Sets the parameters related to the Ethernet interface and to its
communication channels.
 Fieldbus Sets the parameters related to the External Fieldbus interface
through the CBX500 and to its communication channels.
 Display Sets the Display language and Layout of the BM150 Display
when using the CBX500 connection box.
 Diagnostics Enables various diagnostic messages, formatting and actions.
 Reading System Layout Allows configuring the device according to the desired layout:
Standalone, ID-NET™ or Master/Slave RS232
 Image Processing Sets the image processing parameters shared by all available
symbologies.

1D & 2D, Postal Codes
Sets the characteristics of the code symbologies to be read.
 Data Collection Defines the code-collection parameters and the output message
format.
 Digital I/O Configures the reader input/output parameters.
 Match Code Allows setting a user-defined code and relative parameters to
which the read code will be compared (matched).
 Miscellaneous Sets the reader name and the saved image format.
 Symbol Verification Sets the parameters relative to the various specifications in the
Standards which regulate code validation.
 LEDs And Keypad
Sets the X-PRESS™ LED and Keypad parameters related to their
selected Functions: Beeper, Green Spot, Setup, Positioning, etc.