Datalogic A30, Руководство по оборудованию

Страница: 47 / 64

TYPICAL LAYOUTS
37
6
6 TYPICAL LAYOUTS
The following typical layouts refers to system hardware configurations. However, these layouts
also require the correct setup of the software configuration parameters.
6.1 EMBEDDED (ON-BOARD) GIGAETHERNET
A point-to-point configuration can be made to the on-board Ethernet connection. In order to be
recognized by VPM, it is necessary to align the camera’s Ethernet parameters using VPM. For
further details, refer to Configuring the Impact Device or Camera in the Impact Reference Guide.
In a Point-to-Point layout the camera is connected to a local host by using a CAB-GE0x cable.
There is no need to use a crossover adapter since the camera incorporates an autocross
function.
Figure 44 - Standalone Layout to Ethernet Host (Point-to-Point)
CAB-GE0x
Ethernet Host
(Data coll A30
configuration)